40G OM3 Multimode Fiber Jumper Cord - 3m (10ft) MTP(F)/PC to 4X LC/PC Duplex Breakout Cable

This 3-meter OM3 multimode fiber jumper cord is designed for high-speed data transmission in dense network environments. It connects a 40GBase-SR4 QSFP+ transceiver to four 10Gbps LC SFP+ transceivers, making it ideal for data centers, servers, and switches. The cable supports 40 Gbps bandwidth and is built for reliability with low insertion loss and high signal integrity.

The cable uses OM3 fiber with a 50/125µm core and cladding, ensuring immunity to electromagnetic interference. It features an OFNP jacket that emits low smoke and fumes when burned, making it suitable for plenum and in-wall installations. The MTP(F)/PC connector has push-pull tabs for easy installation and removal, while the LC connectors are designed for compactness and improved cable management.

The cable is compatible with 40GBase-SR4 QSFP+ modules and 10Gbps LC SFP+ transceivers. It supports both 850nm and 1300nm wavelengths with a modal bandwidth of 2000MHz km at 850nm. The MTP connector has an outer diameter of 3.0mm, while the LC connectors measure 2.0mm, ensuring compatibility with standard ports and reducing space requirements.

Each cable comes with a full test report verifying its performance, including insertion loss and return loss. The slim uniboot design of the LC connectors helps reduce clutter in tight spaces. The cable is ideal for use in high-density environments where space efficiency and signal reliability are critical.

Brand: StarTech.com
Model: MPO8LCPL3M
Specifications: 3m (9.8ft), OM3, 40 Gbps, MTP(F)/PC to 4x Duplex LC Breakout, 850nm or 1300nm VCSEL, Modal Bandwidth: 2000MHz km at 850nm, Insertion Loss: Below 0.5dB (MTP), 0.2dB (LC)
Features: Plenum-rated jacket, Low insertion loss, Push-pull tabs for easy installation, Slim uniboot LC connectors, Includes test report